Product Introduction
The conductivity sensor uses a four-electrode measurement principle, providing longer lifespan and higher accuracy. It can be applied in various environments that require conductivity measurement, including surface water, groundwater, industrial water, and wastewater.
Product Features:
Offers multiple installation methods and housing materials, suitable for various application environments.
Automatic temperature compensation.
Features easy cleaning, robustness, and corrosion resistance.
Wide measurement range with short response time.
Factory calibrated for easy installation and maintenance.
Measurement Principle | Four-electrode method |
Measurement Range | 0-200mS/cm |
Measurement Accuracy | 0-100 mS/cm，±1%； 100-200 mS/cm，±2% |
Resolution | 1μS/cm-100μS/cm（base on range） |
Response Time (T90) | <10 seconds |
Communication Mode | RS485 Modbus Protocol |
Calibration Method | Single-point or two-point calibration |
Storage Temperature | -20°C to +60°C |
Temperature Range | 0°C to 50°C |
Installation Method | Immersion type |
Pressure Range | ≤1 Mpa |
Power Supply | DC 12-24V, average current <50 mA |
| S16-A | Digital type, four-electrode conductivity cell ,measurement range 1 μS/cm - 200 mS/cm, length 225.5 mm* diameter 30 mm. |
| S16-B | Digital type, planar four-electrode, measurement range 1 μS/cm - 100 mS/cm, length 225.5 mm*diameter 30 mm. |
